MPS75SL 機(jī)械軸承絲杠平臺 | MPS75SL Mechanical-Bearing Ball-Screw Linear Stage | 滾珠絲杠驅(qū)動直線定位平臺
The MPS75SL is a compact, high-performance linear positioning stage that is perfect for the confines of the laboratory while providing the high reliability required in a production environment. It is the ideal choice for measurement, testing, accurate alignment and component assembly.
Mechanical Specifications
| Model | MPS75SL-025 | MPS75SL-050 | MPS75SL-075 | MPS75SL-100 | ||
|---|---|---|---|---|---|---|
| Travel | 25 mm | 50 mm | 75 mm | 100 mm | ||
| Accuracy | Standard | ±2.5 μm | ±3.0 μm | ±3.5 μm | ±4.0 μm | |
| HALAR(1) | ±1.0 μm | ±1.0 μm | ±1.5 μm | ±1.5 μm | ||
| Resolution | 0.1 μm | |||||
| Repeatability (Bidirectional)(1) | ±0.75 μm | |||||
| Straightness | ±2.0 μm | ±2.0 μm | ±3.0 μm | ±3.0 μm | ||
| Flatness | ±2.0 μm | ±2.0 μm | ±3.0 μm | ±3.0 μm | ||
| Maximum Speed |
1.0 mm/rev Ball Screw |
DC Motor | 50 mm/s | 50 mm/s | 50 mm/s | 35 mm/s |
| SM Motor | 30 mm/s | 30 mm/s | 30 mm/s | 30 mm/s | ||
| Load Capacity(2) | Horizontal | 15 kg | ||||
| Side | 15 kg | |||||
| Vertical | 4 kg | |||||
| Stage Mass | 1.7 kg | 1.8 kg | 1.9 kg | 2.0 kg | ||
| Material | Anodized Aluminum Body | |||||
- With Aerotech controllers.
- Payload specifications are single-axis system.
- Excessive duty cycle may impact stage accuracy.
- Specifications are for single-axis systems measured 25 mm above the tabletop.
- Contact factory for specifications of stages with bellows option.
Electrical Specifications
| Model | DC Motor (Standard and VAC) | SM Motor (Standard and VAC) |
|---|---|---|
| Drive System | DC Brush Servomotor | 24 VDC Bipolar Stepper Motor |
| Feedback | 10,000 lines/rev Rotary Encoder | N/A |
| Electronic Resolution | 0.025 μm | 0.025 μm @ 40,000 steps/rev Motor Resolution |
| Maximum Bus Voltage | 48 VDC | 48 VDC* |
| Limit Switches | 5V, Normally Closed | |
-
*With Aerotech control system.
Recommended Controller
| Model | DC Motor and SM Motor | |
|---|---|---|
| Multi-Axis | A3200 | Npaq/Npaq MR/Ndrive MP |
| Ensemble | Ensemble LAB/Epaq/Epaq MR/Ensemble MP | |
| Single Axis | Soloist |
Soloist MP |
-
MPS75SL Load Curves
Dimensions
-
MPS75SL
-
MPS75SL Bellows Option
-
MPS75SL Mounting Plates
-
HDZ-MPS75SL L-Bracket
Ordering Information
MPS75SL Series Drive-Screw Stage
| Option | Description |
|---|---|
| -025 | 25 mm travel stage with drive screw and limits |
| -050 |
50 mm travel stage with drive screw and limits |
| -075 | 75 mm travel stage with drive screw and limits |
| -100 | 100 mm travel stage with drive screw and limits |
Stage Construction
| Option | Description |
|---|---|
| -VAC | Vacuum preparation of the stage and motor to 10-6 torr |
Tabletop
| Option | Description |
|---|---|
| -TTM | Metric pattern/thread tabletop |
Drive Screw
| Option | Description |
|---|---|
| -B1MM | 1 mm/rev precision-ground ball screw |
Motor
| Option | Description |
|---|---|
| -DC | DC servomotor with 3 meter integral cable |
| -SM | Stepping motor with 3 meter integral cable |
Limits
| Option | Description |
|---|---|
| -5V-NC | 5 V normally-closed limits |
Way Cover
| Option | Description |
|---|---|
| -BELLOWS | Bellows way cover (not available with VAC option) |
Options
| Option | Description |
|---|---|
| -MP | Breadboard mounting plate |
Testing
| Option | Description |
|---|---|
| -PLOTS | Accuracy and repeatability plots |
| -NO PLOTS | No performance plots |
Accessories (to be ordered as separate line item)
| Option | Description |
|---|---|
| HALAR | High-accuracy system linear error correction for accuracy and repeatability |
| HDZ-MPS75SL | Right-angle L-bracket |
| HDZ-MPS75SL-VAC | VAC 6 prepared right angle L-bracket |
| ALIGNMENT-NPA | Non-precision XY assembly |
| ALIGNMENT-NPAZ | Non-precision YZ assembly |
| ALIGNMENT-PA10 | XY assembly; 10 arc sec orthogonal |
| ALIGNMENT-PA10Z | XZ or YZ assembly; 10 arc sec orthogonal |
| ALIGNMENT-PA5 | XY assembly; 5 arc sec orthogonal |
| ALIGNMENT-PA5Z | XZ or YZ assembly; 5 arc sec orthogonal |